Sodex Mobile: Manage NTRIP profiles

Summary

You can open NTRIP settings and status information in Sodex Mobile by tapping the NTRIP status tile on the SDX-Pole or 3D Scan page. From there, you can review the active NTRIP connection details, open Manage Profiles, and add, switch, edit, or delete saved profiles.

Introduction

NTRIP profile management helps you keep several correction-service configurations ready on one device. The NTRIP status tile on the SDX-Pole and 3D Scan pages is the entry point for both status information and profile management.

When you tap the NTRIP status tile, Sodex Mobile opens the NTRIP settings view. There you can see the status information and the connection details of the selected setup, including the mountpoint, host, port, and username. Below that, the Manage Profiles section opens the list of saved profiles.

If the NTRIP connection is configured correctly and working, the NTRIP status tile is green. All three status tiles — RTK Receiver, GNSS, and NTRIP — should be green before you start measuring or scanning.

Prerequisites

• You can open the SDX-Pole or 3D Scan page in Sodex Mobile.
• You have the correction-service details for each profile you want to save.
• Your receiver and network connection are ready for use.
• You are using the iPhone where you want the saved profiles to be available during capture.

Step-by-step instructions

1. Open NTRIP settings and status information

1. Open Sodex Mobile.
2. Go to the SDX-Pole or 3D Scan page.
3. Tap the NTRIP status tile in the status bar.

Expected result: The NTRIP settings view opens. You can see the status information and the selected NTRIP connection details, including the mountpoint, host, port, and username.

2. Open the saved profile list

1. In the NTRIP settings view, find the Manage Profiles section.
2. Tap Manage Profiles.

Expected result: A list of the profiles saved on this iPhone opens.

3. Add a new profile

1. Open the saved profile list.
2. Tap the + button in the top-right corner.
3. Enter the correction-service details for the profile you want to save.
4. Save the profile.

Expected result: The new profile is stored on this iPhone and appears in the profile list.

4. Edit or delete a saved profile

1. Open the saved profile list.
2. Find the profile you want to change.
3. Swipe left on the profile.
4. Choose the option to edit or delete it.
5. If you edit the profile, save your changes.

Expected result: The updated profile remains available in the list, or the deleted profile is removed from the list.

5. Switch to another saved profile

1. Open the saved profile list.
2. Select the profile that matches your location, correction service, or network setup.
3. Return to the NTRIP settings view and review the displayed details.

Expected result: Sodex Mobile uses the selected profile. The displayed mountpoint, host, port, and username match the chosen setup.

6. Verify the setup before capture

1. Return to the SDX-Pole or 3D Scan page.
2. Check the NTRIP tile in the status bar.
3. Start measuring or scanning only after the NTRIP tile is green and the overall capture setup is ready.

Expected result: The selected profile is active, and the NTRIP tile is green before you begin field capture.

Limits and notes

• The NTRIP status tile on the SDX-Pole and 3D Scan pages is where you open NTRIP settings and status information.
• In the NTRIP settings view, you can see the selected connection details, including mountpoint, host, port, and username.
• The Manage Profiles section opens the list of saved profiles.
• New profiles are added with the + button in the top-right corner.
• Existing profiles can be edited or deleted with a left-swipe in the profile list.
• NTRIP profiles are saved locally on the iPhone.
• If you sign in with the same user account on another device, the profiles from this iPhone are not available there automatically.
• Any user who signs in on the same iPhone can access the NTRIP profiles saved on that device.
• Start measuring or scanning only after the NTRIP tile is green on the SDX-Pole or 3D Scan page.
• If the NTRIP tile is not green, review the selected profile and the displayed NTRIP details before you continue with capture.

Related articles

• Article: Sodex Mobile - How to connect to the SDX-Pole Antenna