Skip to main content

Starlink setup for SDX-Compact

Updated

Introduction

In remote construction environments, internet access is often limited or unavailable. To ensure reliable connectivity, the SDX-Compact can be configured to use Starlink as its primary internet source.

This article explains how customers prepare their Starlink system so that Sodex Support can connect the SDX-Compact to the Starlink Wi-Fi network. A one-time remote support session is required to disable the device’s default Wi-Fi hotspot and link it to the Starlink router. The internal SIM card remains active and functions automatically as a fallback connection.

Using Starlink provides:

  • Stable internet in remote locations
  • Reliable real-time cloud syncing
  • Remote diagnostics and support access
  • Continuous operation even when local networks are unavailable
Info Setup requires a one-time remote session with Sodex Support. The SDX-Compact’s internal SIM stays active and automatically acts as a fallback if Starlink is offline.
SDX-Compact OnTop SDX-Compact OnTop systems are connected to a Wi-Fi network in the same way. A Sodex technician does it in a one-time remote session, so contact Sodex Support to book it. The internal SIM stays active as the fallback connection.

Starlink Setup Requirements

Before the SDX-Compact can be connected to Starlink, the following must be configured on the Starlink system:

Important Make sure the requirements below are completed before the remote support session. This helps avoid delays during configuration.

Wi-Fi Network

Ensure that the Starlink router is set up and broadcasting an active Wi-Fi network with working internet access.

SSID and Password

The Wi-Fi name (SSID) and password must not contain any spaces. If needed, rename the network in the Starlink App.

Subnet Configuration

The Starlink router must not use any of the following subnets in the range below:

192.168.0.1/24 → 192.168.10.1/24

These ranges are reserved by the SDX-Compact.

Recommended subnet for Starlink:

10.0.0.1/16

A video tutorial showing how to change the subnet is available here.

Once these conditions are met, Sodex Support can complete the system configuration.

Recommended Use the following subnet for Starlink whenever possible: 10.0.0.1/16

Connecting the SDX-Compact to Starlink

The SDX-Compact must be configured by a Sodex technician through the device’s built-in SIM connection. During the remote session, the technician will:

After configuration:

  • If Starlink is online: The SDX-Compact uses Starlink as its primary internet source.
  • If Starlink is offline: The device automatically switches to the internal SIM card.
  1. Disable the SDX-Compact hotspot
  1. Connect the device to the Starlink Wi-Fi network
  1. Update firewall rules to allow internet traffic through Starlink
After configuration The SDX-Compact uses Starlink as primary internet when available and switches to the internal SIM automatically if Starlink is offline.
Important Avoid turning Starlink on or off while the SDX-Compact is running, as sudden network changes can interrupt connectivity and ongoing processes.

Accessing SDX-Mate Through Starlink

After the SDX-Compact is connected to Starlink, its internal hotspot is disabled. To access the SDX-Mate interface:

The subnet configuration video also shows where the Starlink App lists connected devices.

\\Available translations\\: en-us

  1. Open the Starlink App.
  1. Navigate to the list of connected devices.
  1. Look for a device labeled “sdx” or “nvidia”.
  1. Note the IP address assigned to that device.
  1. Enter the IP address into your browser to access SDX-Mate.
Tip The subnet configuration video also shows where the Starlink App lists connected devices.

Related articles

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk